Ubiquiti UniFi Switch Lite USW-Lite-8-POE

Ubiquiti UniFi Switch Lite USW-Lite-8-POE

1 620,-

An 8-port, Layer 2 PoE switch supporting silent fanless cooling.(4) GbE PoE+, (4) GbE ports52W total PoE availability*Wall mountableThe USW-Lite-8-PoE is a full

For øyeblikket tomt på lager.

Ta gjerne kontakt med oss for nøyaktig leveringstid eller et alternativt produkt :)

Del

Artikkelnummer: 2811

Leverandør: UBIQUITI

Informasjon
Tilbakemeldinger

An 8-port, Layer 2 PoE switch supporting silent fanless cooling.

(4) GbE PoE+, (4) GbE ports

52W total PoE availability*

Wall mountable

The USW-Lite-8-PoE is a fully managed Layer 2 switch with eight Gigabit Ethernet ports for your RJ45 Ethernet devices. Four ports also offer auto-sensing 802.3at PoE+ that provide up to a total PoE wattage of 52W for UniFi Access Points or other PoE devices.Managed and configured by the UniFi Network Controller with UniFi mobile app support, the USW-Lite-8-PoE offers Layer 2 switching protocols and features. The UniFi Network Controller and mobile app allow admins to configure and monitor virtually all of the switch features in a graphical user interface from anywhere.

Technical Specifications

LEDs
Switching Features
Hardware
Mechanical
Dimensions	99.6 x 163.7 x 31.7 mm (4 x 6.4 x 1.3")
Weight	295 g (10.4 oz)
Enclosure material	Polycarbonate
Management interface	Ethernet In-Band
Networking interface	(8) GbE RJ45 ports
PoE interface	(4) PoE/PoE+ (Pins 1, 2+; 3, 6-)
Total non-blocking throughput	8 Gbps
Switching capacity	16 Gbps
Power method	54V DC, 1.1A power adapter
Power supply	54V, external, 60W
Supported voltage range	50—57V DC
Max. power consumption	8W (Excluding PoE output)
Total available PoE	52W* _{*With an external 60W power adapter.}
Max. PoE wattage per port by PSE	PoE+: 30W
Button	Factory reset
Ambient operating temperature	-15 to 40° C (5 to 104° F)
Ambient operating humidity	10 to 90% noncondensing
Certifications	CE, FCC, IC
Layer 2 features	IGMP snooping STP / RSTP with priorities and port-level disable Port isolation Storm control Voice VLAN Port mirroring LACP port aggregation Multicast / broadcast rate limiting MAC address blocking Flow control 802.1X control Jumbo frames Proprietary loop protection DHCP snooping / guarding Egress rate limit LLDP-MED Port restricted by MAC Device isolation with ACLs
Layer 3 features	–
System	Status
Ethernet	PoE Speed/link/activity
PoE	Link/activity