With the TC2 heat press Secabo shows up with the right press for the introduction into textile finishing and other transfer techniques. On the digital controller of the Secabo TC2 time and temperature for the transfers can be set. After the transfer is done, an acoustic signal sounds. The contact pressure is adjusted by a hand wheel on the upper side of the heating plate. The pressing operation starts when the pressing lever is closed. The large opening angle allows comfortable preparing of the transfer objects on the base plate. The TC2 has a working area of 23cm x 33cm and a heating plate with a power consumption of 1.000W.

Features

Digital Controllers

Time and temperature can easily be set and controlled by the digital controllers.

Variable work pressure

The work pressure is easy to adjust - in each case matching the transfer object and procedure.

Safe working

The safety and quality of this device is constantly monitored - according to German safety standards.

Precise temperature distribution

The high-quality heat plate ensures an exact temperature distribution over the entire heating surface.

Technical Data
dimensions34cm x 40cm x 46cm
working area23cm x 33cm
pressure settingthe heating plate can be adjusted with a hand reel
max. downforce150 g/cm²
max temperature225 °C
maximum time preset999 s
folding angle0°-45°
power supply230V / 50Hz - 60Hz, 1,0kW
environment5°C - +35°C / 30% - 70% humidity
weight without packaging18 kg
weight with package19,50 kg
BrandSecabo